Monitoring and prediction of land use/land cover changes using CA-Markov model: a case study of Ravansar County in Iran

Human‐induced land use/land cover (LULC) changes are among the most important processes that shape the dynamics of the earth’s surface. This phenomenon, which is occurring at an astonishing rate, and its consequential environmental impacts have become an important area of research for scientists.Therefore, a wide range of methods and models have been developed to detect and predict these alterations, among which cellular automata (CA) models such as the CA‐Markov model, due to their affinity to geographic information system (GIS) and remote sensing (RS), are appropriate for detailed resolution modelling and simulating dynamic spatial processes. In Iran, the district of Ravansar has undergone severe LULC changes recently, thus to take the necessary precautions, decision‐makers need to predict and determine the extent of these changes. In this study, using spatial analysis methods the LULC changes in Ravansar were investigated from 1992 to 2015. Subsequently, the CA‐Markov model was applied to simulate the spatial pattern changes of LULC until 2030. Our results indicated that from 1992 to 2015, this region has witnessed a noticeable increase in the areas of the built‐up and agricultural lands (both aquatic and non‐aquatic), resulting in the decrease of the gardens, range, and bare lands. The simulated LULC map showed that this trend will continue due to more urbanization and development of agricultural areas.     

Estimation of Pore Volume Compressibility in Carbonate Reservoir Rocks Based on a Classification

Geotechnical and Geological Engineering - This study examined the petrographically classification, petrological and petrophysical characteristics by taking a vast range of carbonate reservoir rock...     

Impacts of Depositional Facies and Diagenesis on Reservoir Quality: A Case Study from the Rudist-bearing Sarvak Formation, Abadan Plain, SW Iran

An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield, and provides an improved understanding of this main reservoir in the Abadan Plain, in the Zagros Basin, SW Iran. The main objective of this study is to evaluate reservoir potential of the Sarvak Formation, and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells. Eight main facies are recognized and categori...     

Optimization and Characterization of Tl(I) Adsorption onto Modified Ulmus carpinifolia Tree Leaves

Ulmus carpinifolia tree leaves were successfully used to remove Tl(I) from aqueous solution in a batch system. In order to improve the uptake capacity of sorbent, it was modified by various chemical agents such as NaOH, HNO₃, NH₃, NaCl, NaHCO₃, and CaCl₂. Among the modifiers, NaCl was the best. Equilibrium behavior of sorbent with Tl(I) was examined by the several isotherms. Considering modified U. carpinifolia equilibrium data fitted well to the Langmuir model with maximum capacity of 54.6 mg/g. The other isotherms such as: Freundlich and Dubinin‐Redushkevich (D‐R) models were also examined. The central composite design (CCD) was successfully employed for optimization of biosorption process. An empirical model was given through using response surface methodology. Also its validation was recognized by using relevant statistical tests such as ANOVA. The optimum conditions of biosorption: pH, m (amount of sorbent) and C (initial concentration) were found to be 7.9, 11.4 g/L, and 8.8 mg/L, respectively. On the other hand thermodynamic parameters: ΔG, ΔH, and ΔS were evaluated: the obtained results show that biosorption process was spontaneous and exothermic. Eventually, FT‐IR analysis confirmed that the main functional groups of sorbent have been involved through the biosorption process.     

Pesticides Removal Using Conventional and Low‐Cost Adsorbents: A Review

Worldwide pesticide usage has increased dramatically during the last three decades, coinciding with changing practices and increasing by intensive agriculture. This widespread use of pesticides for agricultural and non‐agricultural purposes has resulted in the presence of their residues in various environmental matrices. The occurrence of pesticides and their metabolite transported in rivers, channels, lakes, sea, air, soils, groundwater, and even drinking water, proves the high risk of these chemicals to human health and the environment. Therefore, pesticide removal is of an increasing concern. In this study, a review of the published literature dealing with pesticides removal process is presented. Firstly, pesticide removal by conventional means is briefly considered. Secondly, the use of the low‐cost sorbent through biosorption process is discussed comprehensively. The effect of factors such as pH, contact time, sorbent dosage, initial pesticide concentration, and optimization of biosorption conditions is also discussed. Kinetic, thermodynamic, and mechanism studies are also given. This study shows that both microorganisms and other materials with biological origin like agricultural by‐products may be used to this end. There is a significant potential for pesticide uptake by the use of various pristine and especially modified biosorbents. In the case of living organisms used as removal agents, degradation may also play a role in the total removal observed.     

Mineral chemical composition and geodynamic significance of peridotites from Nain ophiolite,central Iran

The peridotites from north of the town of Nain in central Iran consist of clinopyroxene-bearing harzburgite and lherzolite with small lenses of dunite and chromitite pods. The lherzolite contains aluminous spinel with a Cr number (Cr^# = Cr/[Cr + Al]) of 0.17. The Cr number of spinels in harzburgite and chromitite is 0.38–0.42 and 0.62, respectively. This shows that the lherzolite and harzburgite resulted from <18% of partial melting of the source materials. The estimated temperature is 1100 ± 200 °C for peridotites, the estimated pressure is <15 ± 2.3 kbar for harzburgites and >16 ± 2.3 kbar for lherzolites and estimated fo₂ is 10^?1±0.5 for peridotites. Discriminant geochemical diagrams based on mineral chemistry of harzburgites indicate a supra-subduction zone (SSZ) to mid-oceanic ridge (MOR) setting for these rocks. On the basis of their Cr^#, the harzburgite and lherzolite spinels are analogous to those from abyssal peridotites and oceanic ophiolites, whereas the chromites in the chromitite (on the basis of Cr^# and boninitic nature of parental melts) resemble those from SSZ ophiolitic sequences. Therefore, the Nain ophiolite complex most likely originated in an oceanic crust related to supra-subduction zone, i.e. back arc basin. Field observations and mineral chemistry of the Nain peridotites, indicating the suture between the central Iran micro-continent (CIM) block and the Sanandaj–Sirjan zone, show that these peridotites mark the site of the Nain–Baft seaway, which opened with a slow rate of ocean-floor spreading behind the Mesozoic arc of the Sanandaj–Sirjan zone as a result of change of Neo Tethyan subduction régime during middle Cretaceous.     

The effect of different meteorological parameters on the temporal variations of reference evapotranspiration

Temporal changes of meteorological variables can affect reference evapotranspiration (ET₀). The goal of the present research is to analyze the changes of ET₀ and identify the impact of effective meteorological parameters to the changes of ET₀. For this purpose, daily meteorological data recorded in 30 synoptic stations of Iran during 1960–2014 were used. The annual and seasonal values of ET₀ were calculated by the recorded data. To calculate ET₀, FAO56 Penman–Monteith method (standard method) was used. The annual and seasonal trends of ET₀ and its eight effective parameters were analyzed. Then the contributions of effective parameters changes on ET₀ were determined. To analyze ET₀ trend at annual and seasonal scales, two common methods, Spearman’s Rho and Mann–Kendall tests, were used. The R ² = 0.99 showed that the results of the mentioned methods were similar and on the basis of T-statistic <0.057, their difference was not significant (95% confidence level). Therefore, only one method’s results (Spearman’s Rho) were reported. On the basis of Spearman’s Rho results, the annual and seasonal values of ET₀ had negative trend in most of arid and semi-arid stations while the trend of this parameter was positive in humid and very humid stations. At annual and seasonal scales, decreasing in wind speed (W), temperature (T), sunshine hours (n), minimum temperature (TN), dew point temperature (TD), maximum temperature (TX), saturation vapor pressure deficit (SVPD) and solar radiation (RS) was observed in 58, 54, 39, 43, 56, 65, 65 and 37% studied stations, respectively. In many scales, the results showed that TX and W were the most effective meteorological variables on ET₀ changes and then SVPD was located in second step in arid and semi-arid stations. In humid and very humid stations, W was the first effective parameter at all scales, except autumn.     

Implementation of online model updating in hybrid simulation

Hybrid simulation combines numerical and experimental methods for cost‐effective, large‐scale testing of structures under simulated earthquake loading. Structural system level response can be obtained by expressing the equation of motion for the combined experimental and numerical substructures, and solved using time‐stepping integration similar to pure numerical simulations. It is often assumed that a reliable model exists for the numerical substructures while the experimental substructures correspond to parts of the structure that are difficult to model. A wealth of data becomes available during the simulation from the measured experiment response that can be used to improve upon the numerical models, particularly if a component with similar structural configuration and material properties is being tested and subjected to a comparable load pattern. To take advantage of experimental measurements, a new hybrid test framework is proposed with an updating scheme to update the initial modeling parameters of the numerical model based on the instantaneously‐measured response of the experimental substructures as the test progresses. Numerical simulations are first conducted to evaluate key algorithms for the selection and calibration of modeling parameters that can be updated. The framework is then expanded to conduct actual hybrid simulations of a structural frame model including a physical substructure in the laboratory and a numerical substructure that is updated during the tests. The effectiveness of the proposed framework is demonstrated for a simple frame structure but is extendable to more complex structural behavior and models. Copyright © 2013 John Wiley & Sons, Ltd.     

Innovative substructuring technique for hybrid simulation of multistory buildings through collapse

Hybrid simulation combines numerical and experimental methods for cost‐effective, large‐scale testing of structures under simulated dynamic earthquake loads. Particularly for experimental seismic collapse simulation of structures, hybrid testing can be an attractive alternative to earthquake simulators due to the limited capacity of most facilities and the difficulties and risks associated with a collapsing structure on a shaking table. The benefits of hybrid simulation through collapse can be further enhanced through accurate and practical substructuring techniques that do not require testing the entire structure. An innovative substructuring technique for hybrid simulation of structures subjected to large deformations is proposed to simplify the boundary conditions by overlapping the domains between the numerical and experimental subassemblies. The advantages of this substructuring technique are the following: it requires only critical components of the structure to be tested experimentally; it reduces the number of actuators at the interface of the experimental subassemblies; and it can be implemented using typically available equipment in laboratories. Compared with previous overlapping methods that have been applied in hybrid simulation, this approach requires additional sensing in the hybrid simulation feedback loop to obtain internal member forces, but provides significantly better accuracy in the highly nonlinear range. The proposed substructuring technique is verified numerically and validated experimentally, using the response of a four‐story moment‐resisting frame that was previously tested to collapse on an earthquake simulator. Copyright © 2014 John Wiley & Sons, Ltd.